Features and Benefits
>Allows for High Strength Splicing
>Low splice loss
>Compact size
>High capacity built-in battery (Optional)
>LCD touch panel provides easy operation
>Short fiber cleave length allows to use ultra mini sleeve
>Remote control by Wi-Fi communication
Technical Specs
Description |
S185HS |
S185PM |
Applicable fibers*1 |
SM, MM, DS, NZDS, High-Index, EDF |
SM, MM, DS, NZDS, High-Index, EDF, PMF |
Cladding diameter |
80 to 150μm |
Coating diameter |
160 to 2000μm (In Fiber holder) 160 to 900μm (Coating clamp splice) |
160 to 1300μm (In Fiber holder) 160 to 900μm (Coating clamp splice) |
Fiber cleave length |
3 to 5mm (Coating clamp splice) 8 to 11mm (Cladding clamp splice) |
Typical splice loss*2 |
SM(ITU-T G652): 0.014dB |
Typical extinction ratio*2 |
− |
PANDA: -36.8dB*3 (Angle offset: 0.6degree) |
Return loss |
>60dB |
Typical splice time*4 |
15s (SM by cladding clamp splice) |
15s (SM by cladding clamp splice) 40s (PANDA by cladding clamp splice) |
Tension strength |
1.96 (+0% to +20%) |
Applicable protection sleeve length |
10 to 60mm |
Typical heat time |
35s (S922:40mm sleeve) |
Splice programs |
Max.200 |
Heater programs |
Max.100 |
Splice data storage |
Max. 1000 including 4 images before and after splice |
Fiber image magnification on LCD |
104X, 278X or 556X |
Dimension |
210W x 180D x 150H mm |
Weight (without Battery) |
4.5kg |
4.75kg |
Monitor |
4.3” wide color LCD with touch panel |
Data output |
USB ver. 2.0 type A: 1 port USB ver. 2.0 mini B: 1 port |
Battery capacity (Optional)*5 |
Typical 60 splice / heat cycles |
Operating temperature |
0 to 40°C |
Storage temperature |
-40 to 60°C |
Humidity |
0 to 90% (Non-condensing) |
Power source |
AC input 100 to 240V (50/60Hz) |
*1 Fibers should be applied to ITU-T standard. In case of other fibers, depending on the type of fiber, the optimization of splice program may be needed or the splice result may not be satisfied.
*2 These are references. Depending on the environment and condition, the number vary.
*3 Extinction ratio -36.8dB is measured in the condition that the initial extinction ratio is -40dB and there is the splice with 0.6 degree of rotation offset.
*4 This value is references. Depending on the type of fiber and condition of fiber on splicer, the number can vary.
*5 This value can produce using fully charged brand new battery at room temperature 20 degree C. Depending on the condition of the battery and operation environment, the number can vary.
